Product Details:
|
Mterial: | 95% Or 96% Alumina | Density: | ≥3.7g/cm3 |
---|---|---|---|
Color: | Brown | Water Absorption: | 0 |
Highest Application Temperature: | 1000℃ | Thermal Expanding Coefficient: | 6.5 (1x10-6/℃) |
Compressive Strength: | ≥2000 Mpa(Psix103) | ||
High Light: | zirconia ceramic shaft,alumina ceramic stick |
Alumina Ceramic shafts Zirconia Rod Al2O3 Stick ZrO2 Shaft DC Circulating Pump Shield Pump Anti-abrasion
Dimensions: ODφ22*IDφ10*12(Bearing)& φ10*82
Material: 95% Alumina ceramic, or Aluminum Oxide, Al2O3,
Color: brown or coffee color
Application: As it features high hardness and wear resistance, low erosion levels, high temperature resistance and corrosion resistance, they are widely used as pump components, They widely apply in rotors for high-speed electric motor, micro pump, shield pump, circulating pump, centrifugal pump, impeller pump, magnetic-drive pump, ground source heat pump, aquarium pump, fountain pump etc. These properties make pumps run longer time than others whose corresponding parts are made from stainless steel without pollution produced. This means using alumina ceramic parts is friendly to environment and is good for its protection
Brown technical ceramics, which contains materials like Ti, Mn, effectively increase its hardness and makes the pumps in which contains ceramics bearings and shafts run much longer time and still remain stable with little abrasion.
Suzhou Jingci Super Hard Materials Co., Ltd, (here after referred to as Jingci and whose website is www.fineceram.com) specializes in precision ceramics for years and has rich experiences in designing and developing technical ceramic solutions for a wide variety of applications. At present, Jingci owns more than ten production lines, bearings and shafts made from ceramics can be machined in high volume to micron precision tolerances using state of the art diamond processing and grinding wheel technology
Machining Accuracy of Ceramic Bearings
Dimension Range (mm) |
OD tolerance | Roundness | Length tolerance | Concentricity | ID Ra | Perpendicularity |
Outer Diameter 15-60 |
0.01 | 0.005 | ±0.05 | 0.025 | Ra0.15 | 0.025 |
Inner Diameter 6-40 |
||||||
Length 5-30 |
Machining Accuracy of Ceramic Shafts | ||||||
Dimension Range (mm) |
OD tolerance (mm) |
straightness (mm) |
Roundness (mm) |
Length tolerance (mm) |
Roughness (mm) |
Straightness (mm) |
Outer Diameter 3-230 |
0.000-0.015 | 0.005 | 0.005 | ±0.05 | Ra0.15-0.25 | 0.005 |
Inner Diameter 1-190 |
||||||
Length 5-400 |
Contact Person: Mrs. Wang
Tel: 18862487753
Fax: 86-0512--66952686